Homelite 40" Bedienungsanleitung PDF herunterladen

40” GRADER BLADE

for T-7 & T-8 Tractors

lum

LIFT LEVER

3/8” HEX CAP SCREW

USE REAR HOLE

LIFT CHAIN

PULL BAR PLATE

BLADE BRACKET

QUICK PIN & CLEVIS PIN

PULL BAR ASSEMBLY

The 40" grader blade is attached to the tractor as

shown in the above illustration by following the se

quence of steps outlined below.

Position the grader blade under the tractor so that

the pull bar assembly may be connected to the front

hitch bracket of the tractor. Secure in place with

two clevis pins and two quick pins.

Attach the lift lever, to the lift arm of the tractor as

shown. Fasten securely with a 3/8" hex head cap

screw, lock nut and lock washer.

Attach the lift chain and links to the lift lever with

a clevis pin and quick pin so that the blade can be lifted

high enough to clear the ground when transporting

from one location to another.

When desired, the blade may be angled to the left or

right by removing the king pin and quick pin from the

center hole in the pull bar plate. Lock the blade in

desired position by replacing the king pin and quick

pin when the alternate holes in the blade bracket line

up with the hole in the pull bar plate.

PART NO. 24695-4

Supersedes Part No. 24695

1 2

Inhaltsverzeichnis

Seite 1 - 40” GRADER BLADE

40” GRADER BLADE for T-7 & T-8 TractorslummLIFT LEVER3/8” HEX CAP SCREW USE REAR HOLELIFT CHAINPULL BAR PLATEBLADE BRACKETQUICK PIN & CLEVI

Seite 2 - 40” GRADER BUDE

40” GRADER BUDEBLADE-grader, 40”WASHER-lock, 5/8NUT-hex, 5/8-11SCREW-hex cap/ 3/8-16 x 1-1/4WASHER-flat, 3/8BRACKETCHAINSCREW-hex cap, 5/8-11 x 3NUT-h

Kommentare zu diesen Handbüchern

Keine Kommentare

Homelite 40" Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Gartengeräte Homelite 40" herunter. Homelite 40" User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gartengeräte Homelite 40"